Abstract
Inserting the Industry 4.0 universe into companies is necessary to guarantee their competitiveness and continuity in the market. And, one of the areas in which industry 4.0 and its technologies are most prominent is maintenance, as the use of intelligent mechanisms are capable of promoting the reliability of systems functioning, predicting failures and anticipating problems and breakdowns in equipment. , thus contributing to increased performance and reduced aggregate costs. The present study then starts from the idea of using Lab-on-chip technology for the hydraulic fluid and lubricant monitoring system and aims to verify the application of Microelectromechanical Systems (MEMS) in maintenance. From the literary review, it was possible to verify that studies relating the use of microsensors for monitoring lubricants are still scarce and from this, applied research was suggested for this purpose, developing a lab-on-chip that be capable of replacing complex and high-cost laboratory analyses.
References
Baglee, D., & Marttonen, S. (2015). The need for big data collection and analyses to support the development of an advanced maintenance strategy. In Proceedings of the International Conference on Data Science (ICDATA) (p. 3). The Steering Committee of The World Congress in Computer Science, Computer Engineering and Applied Computing (WorldComp).
Baheti, R., & Gill, H. (2011). Cyber-physical systems. The impact of control technology, 12(1), 161-166.
Borlido, D. J. A. (2017). Indústria 4.0: Aplicação a Sistemas de Manutenção. f. Dissertação (Mestrado) - Curso de Engenharia Mecânica, Universidade do Porto, Porto.
Campos, J., Sharma, P., Jantunen, E., Baglee, D., & Fumagalli, L. (2016). The challenges of cybersecurity frameworks to protect data required for the development of advanced maintenance. Procedia Cirp, 47, 222-227.
Civerchia, F., Bocchino, S., Salvadori, C., Rossi, E., Maggiani, L., & Petracca, M. (2017). Industrial Internet of Things monitoring solution for advanced predictive maintenance applications. Journal of Industrial Information Integration, 7, 4-12.
Coltro, W. K. T. (2004). Fabricação e avaliação de microdispositivos para eletroforese com detecção eletroquímica (Doctoral dissertation, Universidade de São Paulo).
Costa, A. C. P. R. D. (2021). Modelo neuromórfico para estimulação transcutânea e otimização dos níveis de percepção sensorial.
Deloitte. (2015). Industry 4.0 Challanges and solutions for the digital transformation and use of exponential Technologies. 2015. Disponível em: https://www2.deloitte.com/content/dam/Deloitte/ch/Documents/manufacturing/ch-en- manufacturing-industry-4-0-24102014.pdf>. Acesso em: 12 de set de 2021.
Duchowski, J. K., & Mannebach, H. (2006). A novel approach to predictive maintenance: A portable, multi-component MEMS sensor for on-line monitoring of fluid condition in hydraulic and lubricating systems. Tribology transactions, 49(4), 545-553.
Eifert, T., Eisen, K., Maiwald, M., & Herwig, C. (2020). Current and future requirements to industrial analytical infrastructure—part 2: smart sensors. Analytical and bioanalytical chemistry, 412(9), 2037-2045.
Felton, M. J. (2003). Lab on a chip: Poised on the brink. Analytical Chemistry, 505– 508.
Giannitsis, A. T. (2011). Microfabrication of biomedical lab-on-chip devices. A review. Estonian Journal of Engineering, 17(2), 109.
Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013). Internet of Things (IoT): A vision, architectural elements, and future directions. Future generation computer systems, 29(7), 1645-1660.
Gupta, S., Ramesh, K., Ahmed, S., & Kakkar, V. (2016). Lab-on-chip technology: A review on design trends and future scope in biomedical applications. Int. J. Bio-Sci. Bio-Technol, 8, 311-322.
Haines, D.E. (2006). Neurociência Fundamental: com aplicações básicas e clínicas. 3a edição. Rio de Janeiro: Elsevier.
Instrumentação Analítica. (2015). Lab-On-Chip (online). Disponível em: https://ianalitica.wordpress.com/aplicacoes-com-analisadores-insdustriais/lab-on- chip/. Acessado em: 27 de jan. 2022.
Jantunen, E., Campos, J., Sharma, P., & Baglee, D. (2017). Digitalisation of maintenance. In 2017 2nd International Conference on System Reliability and Safety (ICSRS) (pp. 343-347). IEEE.
Kagermann, H., Wahlster, W., & Helbig, J. (2013). Acatech–National Academy of Science and Engineering. Recommendations for implementing the strategic initiative INDUSTRIE, 4..
Karabegovic, I., Karabegovic, E., Mahmic, M., & Husak, E. (2019). The role of smart sensors in production processes and the implementation of industry 4.0.
Kardec, A., & Nascif, J. (2009). Manutenção: função estratégica. 3ª edição. Rio de Janeiro: Qualitymark: Petrobrás.
Kraft, K., Krafczyk-Korth, J., Muehlan, H., Schmidt, S., & Hoffmann, W. (2011). An epidemiology of care approach to lab-on-a-chip systems in individualized medicine?. Personalized medicine, 8(5), 587-590.
Kuecuekbalaban, P., Schmidt, S., Kraft, K., Hoffmann, W., & Muehlan, H. (2014). Exploring risks and benefits of point-of-care tests for healthcare and self-tests for laypersons: an interview study assessing complementary expert perspectives on diagnostic lab-on-a-chip systems. Technology and Health Care, 22(6), 817-833.
Kumar, A., Shankar, R., & Thakur, L. S. (2018). A big data driven sustainable manufacturing framework for condition-based maintenance prediction. Journal of computational science, 27, 428-439.
Kumar, S., Bajpai, R. P., & Bharadwaj, L. M. (2004, January). Lab-on-a-chip based on BioMEMS. In International Conference on Intelligent Sensing and Information Processing, 2004. Proceedings of (pp. 222-226). IEEE.
Lee, J., Bagheri, B., & Kao, H. A. (2015). A cyber-physical systems architecture for industry 4.0-based manufacturing systems. Manufacturing letters, 3, 18-23.
Mark, D., Haeberle, S., Roth, G., Von Stetten, F., & Zengerle, R. (2010). Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications. Microfluidics based microsystems, 305-376.
Maynard, A. D. (2015). Navigating the fourth industrial revolution. Nature nanotechnology, 10(12), 1005-1006.
Medjaher, K., Skima, H., & Zerhouni, N. (2014). Condition assessment and fault prognostics of microelectromechanical systems. Microelectronics Reliability, 54(1), 143-151.
Moraes, R. B. S (2020). Indústria 4.0: impactos sociais e profissionais. Editora Blucher.
Porter, M. E., & Heppelmann, J. E. (2014). How smart, connected products are transforming competition. Harvard business review, 92(11), 64-88.
Profissão Biotec. (2021). Lab-on-a-chip: a biotecnologia na palma da sua mão (online). Disponível em: https://profissaobiotec.com.br/lab-on-chip-biotecnologia-na- palma-da-sua-mao/. Acessado em 27 de jan. 2022.
Reis, F. d. (2015). Introdução aos Microcontroladores. Disponível em: <http://www.bosontreinamentos.com.br/eletronica/eletronica-geral/introducao-aos- microcontroladores>. Acesso em: 09 set. 2018.
Richter, J. G. (2021). Manutenção preditiva com sistema de identificação de vibrações em vídeo usando ampliação de movimento (Master’s thesis, Universidade Tecnológica Federal do Paraná).
Righetto, S. B. (2020). Manutenção preditiva 4.0: conceito, arquitetura e estratégias de implementação.
Roy, R., Stark, R., Tracht, K., Takata, S., & Mori, M. (2016). Continuous maintenance and the future–Foundations and technological challenges. Cirp Annals, 65(2), 667- 688.
Sacomano, J. B., Gonçalves, R. F., Bonilla, S. H., da Silva, M. T., & Sátyro, W. C. (2018). Indústria 4.0. Editora Blucher.
Schmitt, R. H., & Voigtmann, C. (2018). Sensor information as a service–component of networked production. Journal of Sensors and Sensor Systems, 7(1), 389-402.
Schwab, K., & Davis, N. (2019). Aplicando a quarta revolução industrial. Edipro.
Souza, E. S. D. (2018). Características e impactos da indústria 4.0: percepção de estudantes de ciências contábeis. Dissertação (Mestrado) - Curso de Engenharia e Gestão Industrial, Departamento de Engenharia Mecânica, Universidade de Coimbra, Coimbra.
Souza, V. D. S. (2021). Digital Twin: Uma proposta de geração de ambientes virtuais baseado em comissionamento virtual utilizando motor gráfico Unity3D.
Stankovic, J. A. (2014). Research directions for the internet of things. IEEE internet of things journal, 1(1), 3-9.
Stavis, S. M. (2012). A glowing future for lab on a chip testing standards. Lab on a Chip, 12(17), 3008-3011.
Tanenbaum, A. S. (2007). Organização estruturada de computadores. São Paulo: Pearson Education, 2007.
Voglhuber-Brunnmaier, T., Jakoby, B., Niedermayer, A., & Feichtinger, F. (2021). C6. 3 advanced fluid models for multi-parameter condition monitoring systems for lubricants and hydraulic fluids. SMSI 2021-Sensors and Instrumentation, 216-217.
Weles, E. F. (2019). Protótipo para um sistema de automação de controle patrimonial utilizando tecnologia rfid. Revista Brasileira de Mecatrônica, 1(4), 1-10.
Yao, B., Zhou, Z., Xu, W., Fang, Y., Shao, L., Wang, Q., & Liu, A. (2015, June). Service-oriented predictive maintenance for large scale machines based on perception big data. In International Manufacturing Science and Engineering Conference (Vol. 56833, p. V002T04A015). American Society of Mechanical Engineers.
Zhang, Y., Ren, S., Liu, Y., & Si, S. (2017). A big data analytics architecture for cleaner manufacturing and maintenance processes of complex products. Journal of cleaner production, 142, 626-641.